Carpentry tools

Hand tools used by carpenters today have been used throughout civilization. Tools that do not require electricity were all carpenters and craftsmen had for centuries; thus they contrived to create the intricate work of art and architecture that have endured over time. Imagine what you could do with a combination of hand and power tools next time you go to the hardware store.

Tape measure

The standard measuring tape can be locked in place and retract once done using it making it one of the most essential hand tools. If your initial steps are deleted before you start cutting, you will work twice as hard to get where you need to make your project.

Levels

Levels are a hand tool used in woodworking more than sculpturing, and just like the measuring tape. is a vital tool. Levels are used to verify both horizontal and vertical surfaces to ensure close alignment. Crooked levels can lead to abnormal positions of frames or pictures and wall instability in a whole construction project.

Chisel

A set of chisels is required in carpentry to make elaborate and decorative sculptures. There are a variety of chisels available, each designed for a specific job. The main chisels are the toughest: the shroud, the cutting and separating.

Hammer

Woodwork requires a quality, standard hammer weighing 28.35 grams which is reliable for driving nails with a point and to removing them. When your project requires the destruction of an existing wooden structure, the side of the hammer with the clip of this tool is also useful.

Keyhole saw

The keyhole saw, or jigsaw, is used for cutting curves and making slender marks on corners to give a professional look. This saw is composed of a very narrow blade it allows you to cut corners with very narrow diameters. The adjustable blades allow versatility, so your woodworking project may also include materials such as metal and plastic that has been cut with the jigsaw.

Hand drill

A hand drill can be used instead of an electric one to make small holes in wood. The handle involves a large motor, which causes the rotation of a three-jaw chuck. One turn of the hand drill causes the crank to rotate ten times. According to Woodworking Wisdom, a hand tool known as an auger, which is used for boring larger holes, does not turn as fast as you do with this type of hand drill.

About Handyman On Call

handyman on call icon In the past 10 years, we have established a reputation of reasonably priced, timely and outstanding handyman services. We’ve accomplished hundreds of remodeling, renovation and building projects throughout Maryland, and have proudly earned our customers’ respect with each job.